REMOVABLE AERO SHELLS
Our removable aero shells allow you to adjust helmet ventilation and aerodynamics. Completely ventilated with 31 partially or wholly covered inlets, you now have a real choice, thanks to The One. (Available on The One Premium model).
The One helmet has a specific compartment designed to hold a pair of sunglasses. (Available on The One & Trackdown models).
For those who prefer the road but, from time to time, head off the beaten track, The One helmet is also delivered with a removable mountain bike visor. You can use the same helmet on and off-road. (Available on The One model).
The Click-to-Fit™ System allows precise adjustment. On the road, you will be able to adjust helmet size and pressure to your head for perfect stability, fit and comfort. (Available on all models).
The LED was especially designed for a perfect fit with BOLLE helmets. Located at the highest point of the cyclist’s silhouette, the LED has 2 positions, either continuous or flashing, and offers best possible visibility and, as a result, added safety. If you’re racing and the slightest gram saved is important, fear not, BOLLE has designed a lighter capsule to replace the LED without detracting from its great looks. (Available on The One & Messenger models).
Originally developed for aerospace, this submerged inlet provides less drag for better aerodynamics. It increases airflow inside the helmet, bringing a higher level of ventilation.
The abrupt rear cut-off delivers a smaller wake that reduces drag and so improves aerodynamics.
The wind shells make your helmet more aerodynamic, while bringing extra protection during bad weather.
360° INTEGRATED MIPS
Un unico sistema è più performante che due sistemi indipendenti. Per questo abbiamo deciso di abbinare il sistema MIPS Low Friction Layer al nostro sistema di taglia regolabile (FIT system). Un risultato molto più leggero, che offre massimo FIT & comfort, anche per le più lunghe passeggiate.
Mostly seen on racing cars, the roll cage is a specially engineered and constructed frame built into the vehicle compartment to protect from injuries in case of a rollover. Using this principle, we decided to adapt the roll cage to our helmet construction. The roll cage reinforces the helmet, allowing the creation of huge vents to increase airflow.
Plug them in and stay dry! The vent caps efficiently block off wind and rain for the wettest outings.
With 3 positions, the adjustable visor adapts to all ride conditions, and means your goggles can sit on your forehead.
To create helmets that perform against all types of impacts, the details are key. High-density EPS ensures that high energy impacts are effectively absorbed. Low-density EPS, however, provides superior performance against less severe impacts. Bollé helmets with AViD liner technology use a combination of different EPS densities and/ or optimization of the ventilation channels to virtually decrease the density in the upper area. The result is a lighter, better-ventilated helmet with progressive shock absorption that will absorb a wider range of impacts*. (Available on the Trackdown model.) *compared to a standard EPS liner with uniform thickness.
MIPS ADDS MORE PROTECTION
AGAINST ROTATIONAL MOTION
MIPS is a revolutionary technology that lets the helmet slide relative to the head, adding more protection against rotational motion to the brain caused by angled impacts. Because keeping you safe in every condition is our priority, the TRACKDOWN helmet is the first Bollé helmet equipped with MIPS technology.
MIPS ENABLES A RELATIVE MOVEMENT BETWEEN THE HELMET AND THE HEAD IN ANY DIRECTION.
= THE MORE RED THE MORE STRAIN
This simulation illustrates strain in the brain from a similar angled impact when the user is wearing a helmet without MIPS and a helmet with MIPS.